Original file

Škoda Yeti Bosch EDC17C46 03L906018FJ / 1037563645

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Yeti, hardware number 03L906018FJ and software number 1037563645, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel 170PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018FJ
Software number
1037563645
Software / calibration
03L906018DP

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel 170PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018FJ
Software number1037563645
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file name372
File key30cff480704492b1
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563645Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018FJOffset in the file: 0x04F136
Software / calibration03L906018DP · version 9978Offset in the file: 0x04F150
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018FJ and software number 1037563645. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018FJ1037561021Seat Leon
03L906018FJ1037561548Seat Leon, Seat pcmflash, Seat Alpina
03L906018FJ1037561730Seat Leon, Seat 1P 2.0 TDI
03L906018FJ1037561746Seat Altea
03L906018FJ1037564252Seat Leon, Seat pcmflash
03L906018FJ1037564384Seat Altea XL 2.0 TDI 4WD 6MT, Seat Leon
03L906018FJ1037564417Seat Leon, Seat Altea
03L906018FJ1037564426Seat Leon, Seat pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page