Original file

Seat pcmflash Bosch EDC17C46 03L906018FL / 1037511945

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat pcmflash, hardware number 03L906018FL and software number 1037511945, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat pcmflash2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018FL
Software number
1037511945
Vehicle maker's hardware number
03L906018FJ

Technical data

Vehicle
BrandSeat
Car modelpcmflash
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018FL
Software number1037511945
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0c16fdb9c9b4d192
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037511945Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018FJOffset in the file: 0x04F136
Software / calibration03L906018FL · version 7900Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018FL and software number 1037511945. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018FJ10SW050335Seat
03L906018FK1037508294Volkswagen pcmflash
03L906018FK1037561730Seat pcmflash
03L906018FL1037508295Volkswagen pcmflash
03L906018FL1037560595Audi pcmflash
03L906018FL1037564417Seat pcmflash
03L906018FM1037508296Volkswagen pcmflash
03L906018FM1037560596Audi pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page