Original file

Volkswagen Eos Bosch EDC17C46 03L906018GB / 1037528306

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen Eos, hardware number 03L906018GB and software number 1037528306, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Eos2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018GB
Software number
1037528306
Vehicle maker's hardware number
03L907309N

Technical data

Vehicle
BrandVolkswagen
Car modelEos
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018GB
Software number1037528306
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file name5609
File keyb18d4d203cb88033
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037528306Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309NOffset in the file: 0x04F402
Software / calibration03L906018GB · version 9970Offset in the file: 0x04F41C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LM///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018GB and software number 1037528306. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
VolkswagenFlash2,048.00 KB€15Add to cart
Volkswagen pcmflashFlash2,048.00 KB€15Add to cart

All reads of 03L906018GB / 1037528306

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018GA1037561735Volkswagen Eos 2.0 TDI CR, Volkswagen pcmflash, Volkswagen Eos
03L906018GA10SW054775Volkswagen
03L906018GB1037511971Volkswagen Eos, Volkswagen Eos 2.0 TDI, Volkswagen Eos 2.0 TDI CR
03L906018GB1037524165Volkswagen Passat 2.0 TDI, Volkswagen pcmflash, Volkswagen Eos
03L906018GB1037561740Volkswagen Eos
03L906018GB1037564280Volkswagen Eos 2.0 TDI, Volkswagen pcmflash
03L906018GB10SW046469Volkswagen Touran
03L906018GC1037508903Volkswagen Golf 2.0 TDI, Volkswagen Golf CR 2011 Turbo, Volkswagen Golf 6 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page