Original file

Audi pcmflash Bosch EDC17C46 03L906018HA / 1037560545

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018HA and software number 1037560545, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel · 163.2PS / 120.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018HA
Software number
1037560545
Vehicle maker's hardware number
03L906018JL

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018HA
Software number1037560545
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key071883cb57291e0d
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037560545Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x052FF8
Software / calibration03L906018HA · version 9977Offset in the file: 0x053012
Bosch project identifier (EPK)835/1/EDC17_C46/5/P941//C941DD5WW///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018HA and software number 1037560545. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018H1037550952Audi pcmflash
03L906018H1037563207Volkswagen pcmflash
03L906018H1037563950Audi pcmflash
03L906018H1037564445Audi pcmflash
03L906018HA1037561850Audi pcmflash
03L906018HD1037517568Volkswagen pcmflash, Volkswagen Eos
03L906018HD1037524617Volkswagen pcmflash
03L906018HD1037561739Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page