Original file

Audi pcmflash Bosch EDC17C46 03L906018HK / 1037564218

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018HK and software number 1037564218, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018HK
Software number
1037564218
Vehicle maker's hardware number
03L907309Q

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018HK
Software number1037564218
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc422ab8a153b572f
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037564218Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309QOffset in the file: 0x04F53E
Software / calibration03L906018HK · version 9980Offset in the file: 0x04F558
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LW///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018HK and software number 1037564218. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen SharanFlash2,048.00 KB€15Add to cart
VolkswagenFlash2,048.00 KB€15Add to cart
Volkswagen SharanFlash2,048.00 KB€15Add to cart
Volkswagen SharanFlash2,048.00 KB€15Add to cart
Seat Alhambra II 2.0 TDIFlash2,048.00 KB€15Add to cart
Volkswagen Sharan 2.0 TDI 4Motion 6MT - 140hpFlash2,048.00 KB€15Add to cart

All reads of 03L906018HK / 1037564218

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018HK1037524182Volkswagen Sharan 2.0 TDI CR, Volkswagen Alhambra II 2.0 TDI, Volkswagen pcmflash
03L906018HK1037527002Volkswagen Sharan 2.0 TDI, Volkswagen Alhambra II 2.0 TDI, Volkswagen Sharan 2.0 TDI CR
03L906018HK1037550954Volkswagen Sharan, Volkswagen Sharan 2.0 TDI, Volkswagen pcmflash
03L906018HK1037563928Volkswagen Sharan, Volkswagen Alhambra II 2.0 TDI, Volkswagen Alhambra 2.0 TDI CR
03L906018HK1037564474Volkswagen Sharan 2.0 TDI, Volkswagen Sharan 2.0 TDI CR, Volkswagen pcmflash
03L906018HK10SW046733Volkswagen Sharan
03L906018HK10SW046733 P643X5LWVolkswagen Sharan 2.0 TDI
03L906018HL048343Seat Alhambra 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page