Original file

Audi pcmflash Bosch EDC17C46 03L906018HL / 1037563210

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018HL and software number 1037563210, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018HL
Software number
1037563210
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018HL
Software number1037563210
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyce0a92fcbf8360d2
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563210Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F53E
Software / calibration03L906018HL · version 9978Offset in the file: 0x04F558
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LW///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018HL and software number 1037563210. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
SeatFlash2,048.00 KB€15Add to cart

All reads of 03L906018HL / 1037563210

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018HL1037518196Seat Alhambra 2.0 TDI CR
03L906018HL1037524181Seat Alhambra 2.0 TDI CR, Seat Alhambra II
03L906018HL1037527001Seat Alhambra III 2.0 TDI CR, Seat Alhambra II 2.0 TDI, Seat Alhambra II 2.0 TDI CR
03L906018HL1037550945Seat Alhambra 2.0 TDI CR, Seat pcmflash, Audi
03L906018HL1037563741Audi pcmflash, Seat
03L906018HL1037563924Seat Alhambra, Seat Alhambra 2.0 TDI, Seat Alhambra II 2.0 TDI
03L906018HL1037564442Seat Alhambra II 2.0 TDI, Seat A4 2.0 TDI, Seat Alhambra 2.0 TDI
03L906018HL10SW048343Seat Alhambra II

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page