Original file

Seat Bosch EDC17C46 03L906018HM / 10SW048344

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018HM and software number 10SW048344, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018HM
Software number
10SW048344
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018HM
Software number10SW048344
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1c4999e3c59192d3
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW048344Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F53E
Software / calibration03L906018HM · version 9981Offset in the file: 0x04F558
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LW///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018HM and software number 10SW048344. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018HM1037550946Volkswagen pcmflash, Seat
03L906018HM1037563211Volkswagen pcmflash, Seat
03L906018HM1037563927Seat Alhambra II 2.0 TDI, Seat Sharan, Seat Alhambra 2
03L906018HM1037564443Seat Alhambra 2.0 TDI, Seat pcmflash, Seat Alhambra
03L906018HN1037508298Volkswagen pcmflash
03L906018HN1037560908Seat pcmflash
03L906018HQ1037509900Volkswagen Tiguan, Volkswagen Tiguan 2.0 TDI
03L906018HQ1037561729Volkswagen Tiguan, Volkswagen Tiguan 2.0 TDI, Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page