Original file

Audi A1 Bosch EDC17C46 03L906018HR / 1037524147

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A1, hardware number 03L906018HR and software number 1037524147, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A12.0 diesel · 142.8PS / 105.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018HR
Software number
1037524147
Software / calibration
03L906018HS

Technical data

Vehicle
BrandAudi
Car modelA1
Engine2.0 diesel
Power142.8PS / 105.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018HR
Software number1037524147
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycb27b0f4b6b139f8
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037524147Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018HROffset in the file: 0x053A50
Software / calibration03L906018HS · version 3188Offset in the file: 0x053A6A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)335/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018HR and software number 1037524147. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A1Flash2,048.00 KB€15Add to cart

All reads of 03L906018HR / 1037524147

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018HQ1037564512Volkswagen Tiguan 2.0 TDI, Volkswagen pcmflash, Volkswagen Tiguan
03L906018HQ10SW040519Volkswagen Tiguan
03L906018HR1037521015Audi A1, Audi A1 2.0 TDI, Audi A1 2.0 TDI CR
03L906018HR1037524146Audi A1, Audi A1 2.0 TDI, Audi pcmflash
03L906018HR1037524148Audi A1 2.0 TDI
03L906018HR1037527086Audi A1 2.0 TDI, Audi A1 2.0TDI
03L906018HR1037527089Audi A1, Audi pcmflash, Audi A1 2.0TDI
03L906018HR1037527090Audi A1

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page