Original file

Audi pcmflash Bosch EDC17C46 03L906018JC / 03L906018BR

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018JC and software number 03L906018BR, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018JC
Software number
03L906018BR
Bosch part / software
10SW040578

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018JC
Software number03L906018BR
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4bd6f209a64c4a9e
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW040578Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F136
Software / calibration03L906018JC · version 9979Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018JC and software number 03L906018BR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018J1037564446Audi pcmflash
03L906018JA1037560969Audi pcmflash
03L906018JB1037536613Audi pcmflash
03L906018JB1037561006Audi pcmflash
03L906018JC1037536612Škoda pcmflash
03L906018JC1037561712Audi pcmflash
03L906018JD1037519381Škoda pcmflash
03L906018JE1037509946Volkswagen Tiguan

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page