Original file

Audi A6 2.0 TDI CR Bosch EDC17C46 03L906018JL / 1037515538

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A6 2.0 TDI CR, hardware number 03L906018JL and software number 1037515538, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 2.0 TDI CR2.0 diesel 177.0PS / 130.2kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018JL
Software number
1037515538
Software / calibration
03L906018LA

Technical data

Vehicle
BrandAudi
Car modelA6 2.0 TDI CR
Engine2.0 diesel 177.0PS / 130.2kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018JL
Software number1037515538
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc45d9e736d724613
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037515538Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x052DCA
Software / calibration03L906018LA · version 0756Offset in the file: 0x052DE4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)735/1/EDC17_C46/5/P941//C941DD5WF///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018JL and software number 1037515538. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018JL03L906018JNAudi Q5
03L906018JL03L906018LTAudi Q5
03L906018JL069894Audi Q5 2.0 TDI
03L906018JL069965Audi Q5 2.0 TDI
03L906018JL1037515539Audi A6, Audi A4 2.0 TDI, Audi A6 CR 2011 Turbo
03L906018JL1037518063Audi A6 2.0 TDI, Audi A3 2.0 TDI, Audi A6
03L906018JL1037518064Audi A6, Audi A6 2.0 TDI CR, Audi A6 CR 2012 Turbo
03L906018JL1037518091Audi A6, Audi 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page