Original file

Audi A6 Bosch EDC17C46 03L906018JL / 1037518064

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A6, hardware number 03L906018JL and software number 1037518064, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A62.0 diesel · 176.8PS / 130.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018JL
Software number
1037518064
Software / calibration
03L906018LB

Technical data

Vehicle
BrandAudi
Car modelA6
Engine2.0 diesel
Power176.8PS / 130.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018JL
Software number1037518064
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc3fa3d3739765681
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037518064Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x052D6A
Software / calibration03L906018LB · version 1134Offset in the file: 0x052D84
Bosch project identifier (EPK)435/1/EDC17_C46/5/P941//C941DD5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018JL and software number 1037518064. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A6 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Audi A6Flash2,048.00 KB€15Add to cart
Audi A6 CR 2012 TurboFlash · From the file name: Audi A6 2.0 TDI CR2,048.00 KB€15Add to cart

All reads of 03L906018JL / 1037518064

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018JL069965Audi Q5 2.0 TDI
03L906018JL1037515538Audi A6 2.0 TDI CR
03L906018JL1037515539Audi A6, Audi A4 2.0 TDI, Audi A6 CR 2011 Turbo
03L906018JL1037518063Audi A6 2.0 TDI, Audi A3 2.0 TDI, Audi A6
03L906018JL1037518091Audi A6, Audi 2.0 TDI
03L906018JL1037518117Audi A6, Audi A6 CR 2012 Turbo
03L906018JL1037519311Audi A5, Audi A4 2.0 TDI, Audi A5 2.0 TDI
03L906018JL1037519315Audi A6, Audi A4, Audi A6 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page