Original file

Audi Q5 2.0 TDI Bosch EDC17C46 03L906018JL / 1037527069

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q5 2.0 TDI, hardware number 03L906018JL and software number 1037527069, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TDI2.0 diesel 176.8PS / 130.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018JL
Software number
1037527069
Software / calibration
03L906018MB

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TDI
Engine2.0 diesel 176.8PS / 130.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018JL
Software number1037527069
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd16f5b317065ae31
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037527069Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x0527D0
Software / calibration03L906018MB · version 3886Offset in the file: 0x0527EA
Bosch project identifier (EPK)335/1/EDC17_C46/5/P941//C941DD5X5///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018JL and software number 1037527069. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018JL1037526365Audi Q5, Audi A4 2.0 TDI, Audi A4 2.0 TDI CR
03L906018JL1037526366Audi Q5, Audi Q5 CR 2012 Turbo
03L906018JL1037526367Audi Q5, Audi Q5 2.0 TDI
03L906018JL1037526381Audi Q5 2.0 TDI, Audi Q5, Audi Q5 2.0 TDI CR
03L906018JL1037527096Audi A6 2.0 TDI
03L906018JL1037528366Audi A5, Audi A4 2.0 TDI, Audi A4 2.0 TDI CR
03L906018JL1037528367Audi A4 2.0 TDI CR
03L906018JL1037532874Audi A4 2.0 TDI, Audi A4

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page