Original file

Audi Bosch EDC17C46 03L906018JL / 1037560544

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi, hardware number 03L906018JL and software number 1037560544, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 diesel 149PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018JL
Software number
1037560544
Software / calibration
03L906018SK

Technical data

Vehicle
BrandAudi
Engine2.0 diesel 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018JL
Software number1037560544
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyecdba21405ecc7f0
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037560544Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x0527D0
Software / calibration03L906018SK · version 9977Offset in the file: 0x0527EA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)435/1/EDC17_C46/5/P941//C941DD5X5///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018JL and software number 1037560544. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A5Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4 2.0 TDIFlash12,288.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018JL / 1037560544

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018JL1037560502Audi A6 2.0 TDI, Audi A6
03L906018JL1037560541Audi A4
03L906018JL1037560542Audi A4
03L906018JL1037560543Audi A4
03L906018JL1037560545Audi A6 2.0 TDI CR DPF, Audi A6, Audi A4
03L906018JL1037560546Audi A6, Audi A4
03L906018JL1037560549Audi A5, Audi A4
03L906018JL1037560574Audi A5

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page