Original file

Seat Alhambra III CR 2011 Bosch EDC17C46 03L906018KT / 1037518180

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat Alhambra III CR 2011, hardware number 03L906018KT and software number 1037518180, 384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Alhambra III CR 20112.0 diesel · 115.6PS / 85.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
384.00 KB · Flash
Hardware number
03L906018KT
Software number
1037518180
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandSeat
Car modelAlhambra III CR 2011
Engine2.0 diesel
Power115.6PS / 85.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018KT
Software number1037518180
File
File typeOriginal flash read
File size384.00 KB (393,216 bytes)
From the file nameSeat Alhambra 2.0 TDI CR
File keycaa0c9096b51873d
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037518180Offset in the file: 0x00001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x02F3DE
Software / calibration03L906018KT · version 1602Offset in the file: 0x02F3F8
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5LF///Offset in the file: 0x000078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018KT and software number 1037518180. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat Alhambra II 1.4 TSIFlash2,048.00 KB€15Add to cart

All reads of 03L906018KT / 1037518180

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018KS1037563911Volkswagen Sharan, Volkswagen Sharan 2.0 TDI, Volkswagen pcmflash
03L906018KS1037564447Audi pcmflash, Volkswagen
03L906018KS10SW049321Volkswagen
03L906018KT1037517523Seat Altea
03L906018KT1037524176Seat A4 2.0 TDI, Seat Alhambra 2.0 TDI, Seat Sharan 2.0 TDI
03L906018KT1037526393Seat Alhambra 2.0 TDI, Seat A4, Audi
03L906018KT1037550941Audi A4 2.0 TDI, Seat
03L906018KT1037563215Volkswagen pcmflash, Seat

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page