Original file

Seat Bosch EDC17C46 03L906018KT / 1037524176

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018KT and software number 1037524176, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 115PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018KT
Software number
1037524176
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 115PS
Power115.6PS / 85.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018KT
Software number1037524176
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb6b201342fbf56f4
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037524176Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F402
Software / calibration03L906018KT · version 3203Offset in the file: 0x04F41C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LM///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018KT and software number 1037524176. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat Alhambra 2.0 TDIFlash2,048.00 KB€15Add to cart
Volkswagen Sharan 2.0 TDIFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018KT / 1037524176

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018KS1037564447Audi pcmflash, Volkswagen
03L906018KS10SW049321Volkswagen
03L906018KT1037517523Seat Altea
03L906018KT1037518180Seat Alhambra II 1.4 TSI, Seat Alhambra III CR 2011
03L906018KT1037526393Seat Alhambra 2.0 TDI, Seat A4, Audi
03L906018KT1037550941Audi A4 2.0 TDI, Seat
03L906018KT1037563215Volkswagen pcmflash, Seat
03L906018KT1037563743Seat pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page