Original file

Volkswagen pcmflash Bosch EDC17C46 03L906018LC / 1037563945

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen pcmflash, hardware number 03L906018LC and software number 1037563945, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018LC
Software number
1037563945
Vehicle maker's hardware number
03L906018JL

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018LC
Software number1037563945
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key42606541fdbf1d34
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563945Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x052D6A
Software / calibration03L906018LC · version 9979Offset in the file: 0x052D84
Bosch project identifier (EPK)835/1/EDC17_C46/5/P941//C941DD5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018LC and software number 1037563945. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018LB1037522918Audi pcmflash
03L906018LB1037550908Audi pcmflash
03L906018LB1037560546Audi pcmflash
03L906018LB1037561831Audi pcmflash
03L906018LD1037521090Seat
03L906018LD1037521601Seat Exeo, Seat Exeo CR 2012 Turbo, Seat pcmflash
03L906018LD1037521631Seat Exeo, Seat A4 2.0 TDI, Audi
03L906018LD1037522896Seat Exeo, Seat Exeo 2.0 TDI, Seat Exeo 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page