Original file

Seat Exeo Bosch EDC17C46 03L906018LD / 1037525517

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat Exeo, hardware number 03L906018LD and software number 1037525517, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo2.0 diesel 105KW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018LD
Software number
1037525517
Software / calibration
03L906018PQ

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine2.0 diesel 105KW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018LD
Software number1037525517
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2d43a48f29129649
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037525517Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018LDOffset in the file: 0x053864
Software / calibration03L906018PQ · version 9977Offset in the file: 0x05387E
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)435/1/EDC17_C46/5/P643//C643DX5WU///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018LD and software number 1037525517. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
SeatFlash2,048.00 KB€15Add to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Audi A3 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018LD / 1037525517

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018LD1037521631Seat Exeo, Seat A4 2.0 TDI, Audi
03L906018LD1037522896Seat Exeo, Seat Exeo 2.0 TDI, Seat Exeo 2.0 TDI CR
03L906018LD1037522899Seat Exeo 2.0 TDI CR
03L906018LD1037525516Seat Exeo
03L906018LD1037558537Seat Exeo, Seat Exeo 2.0 TDI
03L906018LD1037558544Seat Exeo, Seat Exeo ST 2.0 TDI 6MT -
03L906018LD1037558545Seat
03L906018LD1037558546Seat Exeo

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page