Original file

Seat Exeo Bosch EDC17C46 03L906018LD / 1037558544

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat Exeo, hardware number 03L906018LD and software number 1037558544, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018LD
Software number
1037558544
Software / calibration
03L906018ME

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018LD
Software number1037558544
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd190f4d8d4a99d02
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037558544Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018LDOffset in the file: 0x05373E
Software / calibration03L906018ME · version 9977Offset in the file: 0x053758
Bosch project identifier (EPK)435/1/EDC17_C46/5/P643//C643DX5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018LD and software number 1037558544. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Seat Exeo ST 2.0 TDI 6MT -Flash2,048.00 KB€15Add to cart

All reads of 03L906018LD / 1037558544

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018LD1037522899Seat Exeo 2.0 TDI CR
03L906018LD1037525516Seat Exeo
03L906018LD1037525517Seat Exeo, Seat A3 2.0 TDI, Audi
03L906018LD1037558537Seat Exeo, Seat Exeo 2.0 TDI
03L906018LD1037558545Seat
03L906018LD1037558546Seat Exeo
03L906018LD1037560547Seat Exeo 2.0 TDI
03L906018LD1037560548Seat Exeo 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page