Original file

Seat Bosch EDC17C46 03L906018M / 1037526395

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018M and software number 1037526395, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 136PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018M
Software number
1037526395
Software / calibration
03L906018N

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018M
Software number1037526395
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7fcc9d1e992fda71
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037526395Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F402
Software / calibration03L906018N · version 9964Offset in the file: 0x04F41C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LM///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018M and software number 1037526395. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018M1037518199Seat Alhambra CR 2011 Turbo
03L906018M1037518718Seat Alhambra
03L906018M1037524175Seat Alhambra 2.0 TDI CR, Seat Alhambra II
03L906018M1037524178Seat
03L906018M1037526397Seat Alhambra
03L906018M1037526398Seat pcmflash, Seat Alhambra, Volkswagen
03L906018M1037527005Seat Alhambra II CR 2010
03L906018M1037527008Seat Alhambra II

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page