Original file

Seat Bosch EDC17C46 03L906018M / 1037563687

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018M and software number 1037563687, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 170PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018M
Software number
1037563687
Software / calibration
03L906018K

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018M
Software number1037563687
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8a5b7ae93ecc4eab
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563687Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F53E
Software / calibration03L906018K · version 9979Offset in the file: 0x04F558
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LW///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018M and software number 1037563687. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018M1037563216Seat
03L906018M1037563218Volkswagen pcmflash, Seat
03L906018M1037563220Seat
03L906018M1037563626Volkswagen pcmflash, Seat
03L906018M1037563744Seat
03L906018M1037563745Volkswagen pcmflash, Seat
03L906018M1037563914Seat Alhambra II, Seat Alhambra
03L906018M1037563918Seat Alhambra, Seat A4 2.0 TDI, Seat Alhambra II

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page