Original file

Volkswagen pcmflash Bosch EDC17C46 03L906018MF / 1037563121

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen pcmflash, hardware number 03L906018MF and software number 1037563121, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash2.0 diesel · 142.8PS / 105.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018MF
Software number
1037563121
Vehicle maker's hardware number
03L906018LD

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine2.0 diesel
Power142.8PS / 105.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MF
Software number1037563121
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5aa125a86940c4b6
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563121Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018LDOffset in the file: 0x05373E
Software / calibration03L906018MF · version 9978Offset in the file: 0x053758
Bosch project identifier (EPK)735/1/EDC17_C46/5/P643//C643DX5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MF and software number 1037563121. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018ME1037522896Volkswagen pcmflash
03L906018ME1037558544Volkswagen pcmflash
03L906018ME1037563120Volkswagen pcmflash
03L906018MF1037560548Volkswagen pcmflash
03L906018MG1037563118Volkswagen pcmflash
03L906018MH1037521073Seat Superb 2 CR 2012
03L906018MH1037522970Škoda Yeti
03L906018MH1037524135Škoda Superb 2

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page