Original file

Seat Superb 2 CR 2012 Bosch EDC17C46 03L906018MH / 1037521073

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat Superb 2 CR 2012, hardware number 03L906018MH and software number 1037521073, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Superb 2 CR 20122.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018MH
Software number
1037521073

Technical data

Vehicle
BrandSeat
Car modelSuperb 2 CR 2012
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MH
Software number1037521073
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameSkoda Superb 2.0 TDI CR
File keyb76b4d9fb39d4b8f
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037521073Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018MHOffset in the file: 0x05373E
Software / calibration03L906018MH · version 2141Offset in the file: 0x053758
Bosch project identifier (EPK)135/1/EDC17_C46/5/P643//C643DX5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MH and software number 1037521073. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018ME1037563120Volkswagen pcmflash
03L906018MF1037560548Volkswagen pcmflash
03L906018MF1037563121Volkswagen pcmflash
03L906018MG1037563118Volkswagen pcmflash
03L906018MH1037522970Škoda Yeti
03L906018MH1037524135Škoda Superb 2
03L906018MH1037527087Volkswagen Caddy
03L906018MH1037527088Seat Octavia 2 CR 2012, Seat pcmflash, Audi

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page