Original file

Audi pcmflash Bosch EDC17C46 03L906018MH / 1037527088

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018MH and software number 1037527088, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018MH
Software number
1037527088

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MH
Software number1037527088
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyaee8239f527d3725
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037527088Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MHOffset in the file: 0x053A50
Software / calibration03L906018MH · version 4316Offset in the file: 0x053A6A
Bosch project identifier (EPK)535/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MH and software number 1037527088. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
ŠkodaFlash2,048.00 KB€15Add to cart
Seat Octavia 2 CR 2012Flash · From the file name: Skoda Octavia 2.0 TDI CR2,048.00 KB€15Add to cart

All reads of 03L906018MH / 1037527088

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018MH1037521073Seat Superb 2 CR 2012
03L906018MH1037522970Škoda Yeti
03L906018MH1037524135Škoda Superb 2
03L906018MH1037527087Volkswagen Caddy
03L906018MH1037532859Škoda Superb 2, Škoda Superb
03L906018MH1037532860Škoda Superb 2 2.0 TDI, Škoda Superb 2.0 TDI, Škoda Octavia 2.0 TDI
03L906018MH1037532861Škoda Superb 2 2.0 TDI, Škoda Superb 2 2.0 TDI CR, Škoda Superb 2
03L906018MH1037532862Škoda Superb

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page