Original file

Škoda Superb Bosch EDC17C46 03L906018MH / 1037532859

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Superb, hardware number 03L906018MH and software number 1037532859, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018MH
Software number
1037532859
Software / calibration
03L906018SA

Technical data

Vehicle
BrandŠkoda
Car modelSuperb
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MH
Software number1037532859
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye1cf26141770289f
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037532859Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MHOffset in the file: 0x053868
Software / calibration03L906018SA · version 5386Offset in the file: 0x053882
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)335/1/EDC17_C46/5/P643//C643DX5WV///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MH and software number 1037532859. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda Superb 2Flash2,048.00 KB€15Add to cart

All reads of 03L906018MH / 1037532859

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018MH1037522970Škoda Yeti
03L906018MH1037524135Škoda Superb 2
03L906018MH1037527087Volkswagen Caddy
03L906018MH1037527088Seat Octavia 2 CR 2012, Seat pcmflash, Audi
03L906018MH1037532860Škoda Superb 2 2.0 TDI, Škoda Superb 2.0 TDI, Škoda Octavia 2.0 TDI
03L906018MH1037532861Škoda Superb 2 2.0 TDI, Škoda Superb 2 2.0 TDI CR, Škoda Superb 2
03L906018MH1037532862Škoda Superb
03L906018MH1037532867Škoda Octavia, Škoda Octavia 2 2.0 TDI, Škoda Superb 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page