Original file

Audi A4 Bosch EDC17C46 03L906018MH / 1037532867

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A4, hardware number 03L906018MH and software number 1037532867, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018MH
Software number
1037532867
Software / calibration
03L906018RT

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MH
Software number1037532867
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8998e211921cba9e
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037532867Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018MHOffset in the file: 0x053868
Software / calibration03L906018RT · version 5385Offset in the file: 0x053882
Bosch project identifier (EPK)335/1/EDC17_C46/5/P643//C643DX5WV///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MH and software number 1037532867. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
ŠkodaFlash2,048.00 KB€15Add to cart
Škoda Superb 2Flash2,048.00 KB€15Add to cart
Škoda OctaviaFlash2,048.00 KB€15Add to cart
Škoda OctaviaFlash2,048.00 KB€15Add to cart
Škoda SuperbFlash2,048.00 KB€15Add to cart
Škoda Superb 2.0 TDIFlash2,048.00 KB€15Add to cart
Škoda Octavia 2 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018MH / 1037532867

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018MH1037532859Škoda Superb 2, Škoda Superb
03L906018MH1037532860Škoda Superb 2 2.0 TDI, Škoda Superb 2.0 TDI, Škoda Octavia 2.0 TDI
03L906018MH1037532861Škoda Superb 2 2.0 TDI, Škoda Superb 2 2.0 TDI CR, Škoda Superb 2
03L906018MH1037532862Škoda Superb
03L906018MH1037532868Škoda Superb, Škoda Superb 2 2.0 TDI CR, Škoda Superb 2
03L906018MH1037542277Škoda Yeti
03L906018MH1037558528Škoda
03L906018MH1037558530Audi pcmflash, Škoda

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page