Original file

Škoda Superb Bosch EDC17C46 03L906018MH / 1037561721

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Superb, hardware number 03L906018MH and software number 1037561721, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018MH
Software number
1037561721
Software / calibration
03L906018RT

Technical data

Vehicle
BrandŠkoda
Car modelSuperb
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018MH
Software number1037561721
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyce0ccd0054560e2a
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037561721Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MHOffset in the file: 0x053868
Software / calibration03L906018RT · version 9977Offset in the file: 0x053882
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)535/1/EDC17_C46/5/P643//C643DX5WV///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018MH and software number 1037561721. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda Octavia 2Flash2,048.00 KB€15Add to cart
Škoda Superb 2.0 TDIFlash2,048.00 KB€15Add to cart
Škoda Superb 2Flash2,048.00 KB€15Add to cart
Škoda Superb 2.0 CR TDiFlash2,048.00 KB€15Add to cart
Škoda Superb 2.0 TDIFlash4,096.00 KB€15Add to cart
Škoda SuperbFlash2,048.00 KB€15Add to cart

All reads of 03L906018MH / 1037561721

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018MH1037560999Škoda Octavia 2 2.0 TDI, Škoda Superb 2, Škoda Octavia 2
03L906018MH1037561005Audi pcmflash, Škoda
03L906018MH1037561517Škoda Superb, Škoda Octavia
03L906018MH1037561536Škoda Superb, Škoda Superb 3 2.0 TDI, Škoda Passat 2.0 TDI CR
03L906018MH1037561722Škoda Superb 2, Škoda Superb, Škoda Superb 2.0 TDI
03L906018MH1037561764Škoda Yeti
03L906018MH1037561810Škoda Superb
03L906018MH1037561882Škoda Octavia 2, Škoda Superb 2

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page