Original file

Audi pcmflash Bosch EDC17C46 03L906018N / 1037526395

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018N and software number 1037526395, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 136PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018N
Software number
1037526395
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018N
Software number1037526395
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3f5f79723d4aad57
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037526395Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F402
Software / calibration03L906018N · version 9964Offset in the file: 0x04F41C
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LM///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018N and software number 1037526395. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018MS1037542267Audi pcmflash
03L906018MS1037561073Audi pcmflash
03L906018MT1037531643Audi pcmflash
03L906018MT1037561748Volkswagen pcmflash
03L906018N1037550943Audi pcmflash
03L906018N1037563220Volkswagen pcmflash
03L906018N1037563925Audi pcmflash
03L906018N1037564450Audi pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page