Original file

Volkswagen Passat CR 2012 Turbo Bosch EDC17C46 03L906018NA / 1037526336

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen Passat CR 2012 Turbo, hardware number 03L906018NA and software number 1037526336, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat CR 2012 Turbo2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018NA
Software number
1037526336
Vehicle maker's hardware number
03L907309AE

Technical data

Vehicle
BrandVolkswagen
Car modelPassat CR 2012 Turbo
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018NA
Software number1037526336
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Passat 2.0 TDI CR
File key9647c67210332963
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037526336Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309AEOffset in the file: 0x053A50
Software / calibration03L906018NA · version 4012Offset in the file: 0x053A6A
Bosch project identifier (EPK)535/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018NA and software number 1037526336. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ferrari pcmflashFlash2,048.00 KB€15Add to cart

All reads of 03L906018NA / 1037526336

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018N1037550943Audi pcmflash
03L906018N1037563220Volkswagen pcmflash
03L906018N1037563925Audi pcmflash
03L906018N1037564450Audi pcmflash
03L906018NA1037529200Volkswagen pcmflash
03L906018NA1037561715Volkswagen pcmflash
03L906018NB1037526337Volkswagen pcmflash
03L906018NB1037529201Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page