Original file

Audi Bosch EDC17C46 03L906018NF / 1037561040

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi, hardware number 03L906018NF and software number 1037561040, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018NF
Software number
1037561040
Vehicle maker's hardware number
03L907309R

Technical data

Vehicle
BrandAudi
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018NF
Software number1037561040
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key30ace762cbac014b
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037561040Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309ROffset in the file: 0x04F176
Software / calibration03L906018NF · version 9978Offset in the file: 0x04F190
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5LA///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018NF and software number 1037561040. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen pcmflashFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen Caddy 2.0 TDIFlash4,096.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart
Volkswagen CaddyFlash2,048.00 KB€15Add to cart

All reads of 03L906018NF / 1037561040

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018NE10SW046734Seat Alhambra II
03L906018NF1037515282Volkswagen Caddy 2.0 TDI, Volkswagen Caddy CR 2012 Turbo, Volkswagen A3 - A3 Berline
03L906018NF1037524631Volkswagen Caddy, Volkswagen Caddy 2.0 TDI, Volkswagen Passat CR 2013 Turbo
03L906018NF1037558556Volkswagen pcmflash, Volkswagen Caddy
03L906018NF1037563263Volkswagen Caddy, Volkswagen Caddy 2.0 TDI, Volkswagen pcmflash
03L906018NF1037564467Volkswagen Caddy, Volkswagen pcmflash, Volkswagen Golf
03L906018NF10SW048933Volkswagen
03L906018NG1037515529Volkswagen Caddy, Volkswagen Caddy 2.0 TDI, Volkswagen Caddy 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page