Original file

Audi pcmflash Bosch EDC17C46 03L906018QF / 1037558533

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018QF and software number 1037558533, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 136PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018QF
Software number
1037558533
Vehicle maker's hardware number
03L906018JL

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018QF
Software number1037558533
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5ec76a29a3ca71ff
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037558533Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018JLOffset in the file: 0x052FF8
Software / calibration03L906018QF · version 9977Offset in the file: 0x053012
Bosch project identifier (EPK)535/1/EDC17_C46/5/P941//C941DD5WW///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018QF and software number 1037558533. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018QE1037526369Volkswagen pcmflash
03L906018QE1037531653Volkswagen pcmflash
03L906018QE1037561868Volkswagen pcmflash
03L906018QF1037521653Audi A6
03L906018QF1037561822Audi pcmflash
03L906018QG1037550925Audi pcmflash
03L906018QG1037558547Audi pcmflash
03L906018QG1037561821Audi pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page