Original file

Seat Bosch EDC17C46 03L906018RJ / 10SW049403

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018RJ and software number 10SW049403, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 176PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018RJ
Software number
10SW049403
Vehicle maker's hardware number
03L906018M

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 176PS
Power176.8PS / 130.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018RJ
Software number10SW049403
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyee32bc45cb2ac53b
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW049403Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018MOffset in the file: 0x04F53E
Software / calibration03L906018RJ · version 9982Offset in the file: 0x04F558
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LW///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018RJ and software number 10SW049403. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018RJ1037563221Audi pcmflash, Audi Alhambra II, Seat
03L906018RJ1037563716Audi pcmflash, Seat
03L906018RJ1037563919Seat Alhambra, Seat Sharan 2.0 TDI CR, Seat pcmflash
03L906018RJ1037564457Volkswagen pcmflash, Volkswagen Alhambra II, Seat
03L906018RK1037536204Volkswagen pcmflash
03L906018RK1037561099Volkswagen pcmflash
03L906018RK1037561802Volkswagen pcmflash
03L906018RL1037542271Volkswagen pcmflash, Volkswagen Sharan

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page