Original file

Seat Altea Bosch EDC17C46 03L906018SS / 1037535344

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat Altea, hardware number 03L906018SS and software number 1037535344, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Altea2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018SS
Software number
1037535344

Technical data

Vehicle
BrandSeat
Car modelAltea
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018SS
Software number1037535344
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key930831695df795d3
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037535344Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018SSOffset in the file: 0x052B4A
Software / calibration03L906018SS · version 6039Offset in the file: 0x052B64
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)234/1/EDC17_C46/5/P643//C643X5WF///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018SS and software number 1037535344. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018SR1037558528Volkswagen pcmflash
03L906018SR1037560999Volkswagen pcmflash
03L906018SR1037561882Volkswagen pcmflash
03L906018SR1037563695Volkswagen pcmflash
03L906018SS1037561745Volkswagen pcmflash, Volkswagen Altea, Seat
03L906018TA1037560555Volkswagen pcmflash
03L906018TA1037561558Volkswagen pcmflash
03L906018TA1037563109Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page