Original file

Škoda Yeti 2.0 TDI Bosch EDC17C46 03L906018TB / 1037560927

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Yeti 2.0 TDI, hardware number 03L906018TB and software number 1037560927, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti 2.0 TDI2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018TB
Software number
1037560927
Vehicle maker's hardware number
03L907309R

Technical data

Vehicle
BrandŠkoda
Car modelYeti 2.0 TDI
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018TB
Software number1037560927
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8fdf31fc2b3e1036
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037560927Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309ROffset in the file: 0x04F422
Software / calibration03L906018TB · version 9977Offset in the file: 0x04F43C
Bosch project identifier (EPK)35/1/EDC17_C46/5/P643//C643DX5LV///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018TB and software number 1037560927. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018TA1037560555Volkswagen pcmflash
03L906018TA1037561558Volkswagen pcmflash
03L906018TA1037563109Volkswagen pcmflash
03L906018TA1037564251Volkswagen pcmflash
03L906018TB1037561857Škoda pcmflash, Škoda Yeti
03L906018TC1037544668Škoda Yeti
03L906018TC1037560511Škoda Yeti 2.0 TDI
03L906018TC1037561858Škoda pcmflash, Škoda Yeti

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page