Original file

Škoda Yeti Bosch EDC17C46 03L907309AG / 1037524675

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Yeti, hardware number 03L907309AG and software number 1037524675, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel 81KW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L907309AG
Software number
1037524675
Software / calibration
03L906018QK

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel 81KW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L907309AG
Software number1037524675
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2c7392a580d3c29f
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037524675Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309AGOffset in the file: 0x053A50
Software / calibration03L906018QK · version 3503Offset in the file: 0x053A6A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)435/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L907309AG and software number 1037524675. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L907309AE10SW050155
03L907309AE10SW050643Volkswagen Passat
03L907309AE10SW100054Volkswagen
03L907309AG1037524674Škoda Yeti
03L907309AG1037524677Škoda Yeti
03L907309AG1037525520Škoda Yeti 2.0 TDI CR, Škoda Yeti
03L907309AG1037527091Škoda A4 2.0 TDI, Škoda Q3 2.0 TDI CR, Škoda Yeti 2.0 TDI
03L907309AG1037527092Škoda Yeti 2.0 TDI CR, Škoda Yeti

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page