Original file

Audi Q3 2017y Bosch EDC17C46 03L907309AH / 1037563110

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3 2017y, hardware number 03L907309AH and software number 1037563110, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 2017y2.0 diesel
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L907309AH
Software number
1037563110
Software / calibration
03L906027D

Technical data

Vehicle
BrandAudi
Car modelQ3 2017y
Engine2.0 diesel
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L907309AH
Software number1037563110
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi Q3 2017y 2.0 TDI
File key3ce35a508596e845
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563110Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309AHOffset in the file: 0x053868
Software / calibration03L906027D · version 9979Offset in the file: 0x053882
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)535/1/EDC17_C46/5/P643//C643DX5WV///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L907309AH and software number 1037563110. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L907309AG1037564491Škoda Yeti 2.0 TDI CR, Škoda Golf, Volkswagen
03L907309AG1037564492Škoda Yeti 2.0 TDI
03L907309AG1037564518Škoda Yeti 2.0 TDI, Škoda Yeti
03L907309AH1037561807Audi Q3, Audi Q3 2017y
03L907309N1037515557Volkswagen Passat,2.0 TDI,140 BHP,104
03L907309N1037519338
03L907309N1037561781Volkswagen
03L907309N1037563258Volkswagen Passat, Volkswagen Passat 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page