Original file

Suzuki SX-4 S BR PERFORMANCE Bosch EDC17C49 0000233920 / 1037540628

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Suzuki SX-4 S BR PERFORMANCE, hardware number 0000233920 and software number 1037540628, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Suzuki SX-4 S BR PERFORMANCE1.6 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0000233920
Software number
1037540628
Vehicle maker's hardware number
33920-62M0
Software / calibration
P_1267_0S500D0

Technical data

Vehicle
BrandSuzuki
Car modelSX-4 S BR PERFORMANCE
Engine1.6 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0000233920
Software number1037540628
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf1da364ca123ae50
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037540628Offset in the file: 0x08001A
Vehicle maker's hardware number33920-62M0Offset in the file: 0x0CA4FE
Software / calibrationP_1267_0S500D0Offset in the file: 0x080C58
Bosch project identifier (EPK)38/1/EDC17_C49/248///P_1267_0S500D0///Offset in the file: 0x080C58

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000233920 and software number 1037540628. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
C150470T6LS00GKI0D570P01Iveco Daily
C155470V6HS0DGGI0D920P01Iveco Daily
C155470V6HS0DGGI0D920P02Iveco Daily
C155470V6HS0DGGI0D921P05Iveco Daily
01844810401037527579Mitsubishi Fuso
02044815401037560093Mitsubishi Canter
02810174551037513112Iveco Daily 3.0HPI, Iveco Daily, Iveco Daily HPI 106 BHP
0281017719New Holland T4.85

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page