Original file

Fiat Ducato III Bosch EDC17C49 0281018521 / 1037518690

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Fiat Ducato III, hardware number 0281018521 and software number 1037518690, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Ducato III2.0 diesel 115PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281018521
Software number
1037518690
Vehicle maker's hardware number
55244343
Software / calibration
P_687_EDC17C49_F117J117

Technical data

Vehicle
BrandFiat
Car modelDucato III
Engine2.0 diesel 115PS
Power115.0PS / 84.6kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0281018521
Software number1037518690
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8c089822f17fdf58
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037518690Offset in the file: 0x08001A
Vehicle maker's hardware number55244343Offset in the file: 0x115FA3
Software / calibrationP_687_EDC17C49_F117J117Offset in the file: 0x080204
Bosch project identifier (EPK)52/1/EDC17_C49/687/P_687//P_687_EDC17C49_F117J117///Offset in the file: 0x080204

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018521 and software number 1037518690. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
02810183841037511380Jeep Grand Cherokee
02810183841037519862Jeep Grand Cherokee
02810183841037541390Jeep Grand Cherokee
02810185211037518673Fiat Ducato
02810191541037526907Fiat Ducato, Fiat Ducato III, Fiat 500
02810191541037529146Fiat Ducato, Fiat Ducato IV
02810193291037536534Jeep Cherokee
02810193291037542425Jeep Cherokee, Jeep Grand Cherokee, Chrysler

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page