Original file

Jeep Cherokee Bosch EDC17C49 0281019329 / 1037544629

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Jeep Cherokee, hardware number 0281019329 and software number 1037544629, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Cherokee2.0 diesel 170PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019329
Software number
1037544629
Vehicle maker's hardware number
51883492
Software / calibration
P_687_EDC17C49_F172J172

Technical data

Vehicle
BrandJeep
Car modelCherokee
Engine2.0 diesel 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0281019329
Software number1037544629
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key45a5037de0b4fd16
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037544629Offset in the file: 0x08001A
Vehicle maker's hardware number51883492Offset in the file: 0x12D5F8
Software / calibrationP_687_EDC17C49_F172J172Offset in the file: 0x12FDE4
Bosch project identifier (EPK)58/1/EDC17C49/687/P687_F172_v2//P_687_EDC17C49_F172J172///Offset in the file: 0x12FDE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019329 and software number 1037544629. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
02810191541037526907Fiat Ducato, Fiat Ducato III, Fiat 500
02810191541037529146Fiat Ducato, Fiat Ducato IV
02810193291037536534Jeep Cherokee
02810193291037542425Jeep Cherokee, Jeep Grand Cherokee, Chrysler
02810193291037544631Jeep Cherokee/Liberty
02810193291037544633Jeep Cherokee
02810193291037547130Jeep Cherokee, Jeep Cherokee/Liberty, Jeep Cherokee
02810193291037547131Jeep Cherokee

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page