Original file

Fiat bravo Bosch EDC17C49 0281030911 / 1037536538

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Fiat bravo, hardware number 0281030911 and software number 1037536538, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat bravo1.6 diesel · 105.0PS / 77.2kW
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281030911
Software number
1037536538
Vehicle maker's hardware number
55261024
Software / calibration
P_687_EDC17C49_F15EJ15E

Technical data

Vehicle
BrandFiat
Car modelbravo
Engine1.6 diesel
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0281030911
Software number1037536538
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0736e201e71fd99d
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037536538Offset in the file: 0x08001A
Vehicle maker's hardware number55261024Offset in the file: 0x1268D8
Software / calibrationP_687_EDC17C49_F15EJ15EOffset in the file: 0x0802FC
Bosch project identifier (EPK)58/1/EDC17C49/687/P687_F15E_v1//P_687_EDC17C49_F15EJ15E///Offset in the file: 0x0802FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030911 and software number 1037536538. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
02810308371037558171Fiat Doblo, Fiat Scudo II, Fiat Doblo 1.6Mjet
028103083710SW019082Fiat Doblo
02810308401037558224Opel Combo
02810308411037544627Opel Combo-d
02810309111037539599Fiat bravo 2013y 1.6MJ
02810309111037547129Lancia Delta III, Lancia Delta
02810309121037536537Lancia Delta, Lancia Delta III
02810309121037547127Lancia Delta III

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page