Original file

Iveco Daily Bosch EDC17C49 0281035639 / 10SW042266

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Iveco Daily, hardware number 0281035639 and software number 10SW042266, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Daily3.0 diesel 180PS
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281035639
Software number
10SW042266
Software / calibration
P_1208_EDC17C49_920

Technical data

Vehicle
BrandIveco
Car modelDaily
Engine3.0 diesel 180PS
Power180.0PS / 132.4kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0281035639
Software number10SW042266
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya93d5b8109c57aa4
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW042266Offset in the file: 0x01801A
Software / calibrationP_1208_EDC17C49_920Offset in the file: 0x060D3C
Bosch project identifier (EPK)48/1/EDC17C49/242/P_1208//P_1208_EDC17C49_920///Offset in the file: 0x060D3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281035639 and software number 10SW042266. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Iveco 3.0HPIFlash · From the file name: Iveco4,096.00 KB€15Add to cart
Iveco daily 2020y 3.0LFlash · From the file name: Iveco daily 2020y 132 KW4,096.00 KB€15Add to cart

All reads of 0281035639 / 10SW042266

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
02810321781037552731Fiat Doblo
02810321781037558232Fiat Doblo
02810337221037560093Mitsubishi Fuso Canter
028103407610SW027301Fiat
042266120810SW042266Iveco Daily
04226612085802338413Iveco Daily
04233217395802338412Iveco Daily
042332332010SW042332Iveco Daily

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page