Original file

Fiat Freemont Bosch EDC17C49 0468225342 / 1037513011

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Fiat Freemont, hardware number 0468225342 and software number 1037513011, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Freemont2.0 diesel · 170.0PS / 125.0kW
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0468225342
Software number
1037513011
Bosch part / software
1037539609
Software / calibration
P_1060_EDC17C49_C129J113

Technical data

Vehicle
BrandFiat
Car modelFreemont
Engine2.0 diesel
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number0468225342
Software number1037513011
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd91a040eb5e1e7ed
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037539609Offset in the file: 0x02001A
Software / calibrationP_1060_EDC17C49_C129J113Offset in the file: 0x038FDC
Bosch project identifier (EPK)55/1/EDC17_C49/1060/P_1060//P_1060_EDC17C49_C129J113///Offset in the file: 0x038FDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0468225342 and software number 1037513011. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page