Original file
Aebi-Schmidt MT750 Bosch EDC17C49 10SW017731P135V90_ / 017731
An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Aebi-Schmidt MT750, hardware number 10SW017731P135V90_ and software number 017731, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Aebi-Schmidt MT7504.5 · 155.9PS / 114.7kW
- Control unit
- Bosch EDC17C49
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 10SW017731P135V90_
- Software number
- 017731
- Bosch part / software
- 10SW029221
- Software / calibration
- P_1358_EDC17C49_V90_V3
Technical data
| Brand | Aebi-Schmidt |
|---|---|
| Car model | MT750 |
| Engine | 4.5 |
| Fuel | Diesel |
| Power | 155.9PS / 114.7kW |
| Control unit | Bosch EDC17C49 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 10SW017731P135V90_ |
| Software number | 017731 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 2b5185574a00b0f7 |
| ECU name | EDC17C49 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW029221 | Offset in the file: 0x02001A |
| Software / calibration | P_1358_EDC17C49_V90_V3 | Offset in the file: 0x043D94 |
| Bosch project identifier (EPK) | 52/1/EDC17C49/1358/P_1358//P_1358_EDC17C49_V90_V3/// | Offset in the file: 0x043D94 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 10SW017731P135V90_ and software number 017731. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C49
| Hardware | Software | Vehicles |
|---|---|---|
| 0423329205 | 10SW042332 | Iveco Daily |
| 0468225342 | 1037513011 | Fiat Freemont |
| 0N2V6P | 1208_EDC17C49_330 | Iveco Daily |
| 10375413911060C126 | 1037541391 | Jeep |
| 1739_EDC17C49_520 | Iveco Daily | |
| 33920-62M0 | 1037537982 | Suzuki SX4 S-Cross |
| 33920-62M0 | 1037537983 | Suzuki SX4, Suzuki SX-4 S-Cross |
| 3XEK0Q0Y | 10SW042332 | Iveco Daily |