Original file

Jeep 3.0 CRD Bosch EDC17C49 68079777AG / 1037513029

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Jeep 3.0 CRD, hardware number 68079777AG and software number 1037513029, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep 3.0 CRD3.0 diesel 190.0PS / 139.7kW
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
68079777AG
Software number
1037513029
Software / calibration
P_1060_EDC17C49_C122J113

Technical data

Vehicle
BrandJeep
Car modelJeep 3.0 CRD
Engine3.0 diesel 190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number68079777AG
Software number1037513029
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye471fbc341881272
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037513029Offset in the file: 0x00001A
Software / calibrationP_1060_EDC17C49_C122J113Offset in the file: 0x000228
Bosch project identifier (EPK)55/1/EDC17_C49/1060/P_1060//P_1060_EDC17C49_C122J113///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68079777AG and software number 1037513029. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
68078911AF1037513011Fiat Freemont 2.0 MJET 16V
68078911AF1037516762Fiat Freemont
68078911AG1037519870Fiat Freemont
68078911AH1037536539Fiat Freemont
68079777AH1037516746Jeep Grand Cherokee
68079777AJ1037519857Chrysler Jeep Grand Cherokee
68079777AK1037519862Jeep
68079777AM10SW071565Jeep Grand Cherokee

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page