Original file

CASE Farmal Bosch EDC17C49 826_EDC17C49_671 / P826V671

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in CASE Farmal, hardware number 826_EDC17C49_671 and software number P826V671, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
CASE Farmal3.4 diesel 95PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
826_EDC17C49_671
Software number
P826V671
Software / calibration
P_826_EDC17C49_671

Technical data

Vehicle
BrandCASE
Car modelFarmal
Engine3.4 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware number826_EDC17C49_671
Software numberP826V671
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key89913c9e1192fe92
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Software / calibrationP_826_EDC17C49_671Offset in the file: 0x000078
Bosch project identifier (EPK)48/1/EDC17C49_C/242/P_826//P_826_EDC17C49_671///Offset in the file: 0x000078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 826_EDC17C49_671 and software number P826V671. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
682253421037539609Fiat Freemont, Fiat Freemont 2.0Mjtd
68225342AA1037534565Fiat Freemont
68225342AB1037513011Fiat Freemont
68225342AB1037539609Fiat Freemont
A078270W5LB0ABQI0A964P041037513112Iveco Daily
A078270W5LB0ABQI0A964P045801557345Iveco Daily
A078270W5LB0AGQI0A970P011037513112Iveco Daily
A078270W5LB0AGQI0A970P015801557345Iveco Daily

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page