Original file

Iveco Daily Bosch EDC17C49 A093320W5LE00XEI0A771P02.HEX

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Iveco Daily, hardware number A093320W5LE00XEI0A771P02.HEX, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Daily2.3 diesel 126PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
A093320W5LE00XEI0A771P02.HEX
Software / calibration
P_842_EDC17C49_771

Technical data

Vehicle
BrandIveco
Car modelDaily
Engine2.3 diesel 126PS
Power126.0PS / 92.7kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberA093320W5LE00XEI0A771P02.HEX
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6ee63ed358a82ad1
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Software / calibrationP_842_EDC17C49_771Offset in the file: 0x000078
Bosch project identifier (EPK)48/1/EDC17C49_C/242/P_842//P_842_EDC17C49_771///Offset in the file: 0x000078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number A093320W5LE00XEI0A771P02.HEX. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page