Original file

Iveco Daily Bosch EDC17C49 A100350V6LS00BAI0R160P01 / 1037560370

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Iveco Daily, hardware number A100350V6LS00BAI0R160P01 and software number 1037560370, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Daily2.3 diesel · 136.0PS / 100.0kW
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
A100350V6LS00BAI0R160P01
Software number
1037560370
Software / calibration
P_1739_EDC17C49_160

Technical data

Vehicle
BrandIveco
Car modelDaily
Engine2.3 diesel
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberA100350V6LS00BAI0R160P01
Software number1037560370
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyad32a12540dfca65
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037560370Offset in the file: 0x01801A
Software / calibrationP_1739_EDC17C49_160Offset in the file: 0x05AB14
Bosch project identifier (EPK)48/1/EDC17C49/242/P_1739//P_1739_EDC17C49_160///Offset in the file: 0x05AB14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number A100350V6LS00BAI0R160P01 and software number 1037560370. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page