Original file

Mitsubishi Fuso - Canter Bosch EDC17C49 C096300V5LDC0MTF0V312P06.HEX / 1037527579

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Mitsubishi Fuso - Canter, hardware number C096300V5LDC0MTF0V312P06.HEX and software number 1037527579, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mitsubishi Fuso - Canter3.0 diesel 130PS
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
C096300V5LDC0MTF0V312P06.HEX
Software number
1037527579
Software / calibration
P1168_3_1_2_CV0E0600

Technical data

Vehicle
BrandMitsubishi
Car modelFuso - Canter
Engine3.0 diesel 130PS
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberC096300V5LDC0MTF0V312P06.HEX
Software number1037527579
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key706164822feb39a7
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037527579Offset in the file: 0x00001A
Software / calibrationP1168_3_1_2_CV0E0600Offset in the file: 0x04CC84
Bosch project identifier (EPK)47/1/EDC17C49/9/P_1168//P1168_3_1_2_CV0E0600///Offset in the file: 0x04CC84

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C096300V5LDC0MTF0V312P06.HEX and software number 1037527579. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page