Original file

Mitsubishi Canter BR PERFORMANCE Bosch EDC17C49 C096300V5LDC0MTF0V312P06.HEX

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Mitsubishi Canter BR PERFORMANCE, hardware number C096300V5LDC0MTF0V312P06.HEX, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mitsubishi Canter BR PERFORMANCE3.0 diesel 130PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
C096300V5LDC0MTF0V312P06.HEX
Software / calibration
P1168_3_1_2_CV0E0600

Technical data

Vehicle
BrandMitsubishi
Car modelCanter BR PERFORMANCE
Engine3.0 diesel 130PS
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberC096300V5LDC0MTF0V312P06.HEX
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0f8d792e4cb0c86d
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Software / calibrationP1168_3_1_2_CV0E0600Offset in the file: 0x000BB4
Bosch project identifier (EPK)47/1/EDC17C49/9/P_1168//P1168_3_1_2_CV0E0600///Offset in the file: 0x000BB4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C096300V5LDC0MTF0V312P06.HEX. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page