Original file

Iveco Daily Bosch EDC17C49 C125400V6HS006QI0D323P06 / 1037513112

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Iveco Daily, hardware number C125400V6HS006QI0D323P06 and software number 1037513112, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Daily3.0 diesel · 170.0PS / 125.0kW
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
C125400V6HS006QI0D323P06
Software number
1037513112
Software / calibration
P_1208_EDC17C49_323

Technical data

Vehicle
BrandIveco
Car modelDaily
Engine3.0 diesel
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberC125400V6HS006QI0D323P06
Software number1037513112
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key18f09ecc9de7d68a
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037513112Offset in the file: 0x01401A
Software / calibrationP_1208_EDC17C49_323Offset in the file: 0x0561D8
Bosch project identifier (EPK)48/1/EDC17C49/242/P_1208//P_1208_EDC17C49_323///Offset in the file: 0x0561D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C125400V6HS006QI0D323P06 and software number 1037513112. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page