Original file

Iveco Morelo Bosch EDC17C49 C155470V6HS0DGGI0D920P02 / 5802338413

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Iveco Morelo, hardware number C155470V6HS0DGGI0D920P02 and software number 5802338413, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Morelo3.0 diesel 211PS
Control unit
Bosch EDC17C49
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
C155470V6HS0DGGI0D920P02
Software number
5802338413
Software / calibration
P_1208_EDC17C49_920

Technical data

Vehicle
BrandIveco
Car modelMorelo
Engine3.0 diesel 211PS
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberC155470V6HS0DGGI0D920P02
Software number5802338413
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc5b92e0c253bc84f
Identification read from the file
ECU nameEDC17C49
Read typeOBD read (no boot area)
Software / calibrationP_1208_EDC17C49_920Offset in the file: 0x17B4AC
Bosch project identifier (EPK)48/1/EDC17C49/242/P_1208//P_1208_EDC17C49_920///Offset in the file: 0x17B4AC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C155470V6HS0DGGI0D920P02 and software number 5802338413. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Iveco DailyFlash4,096.00 KB€15Add to cart
Iveco DailyFlash4,096.00 KB€15Add to cart
Iveco DailyFlash2,048.00 KB€15Add to cart
Iveco DailyFlash4,096.00 KB€15Add to cart

All reads of C155470V6HS0DGGI0D920P02 / 5802338413

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page